Quad Mount
Home | News | Aircraft | Store | Gallery | Contact Us | Info

Style #6

If you have a big 40% or larger plane and love 3D, then this is the mount for you.  Move your power from inch ounces to foot-pounds!


Used primarily for todays massive rudders with 50 degrees of deflection, the quad mount is functional, yet unobtrusive.


Shown here on our 42% Ultimate, the quad mount allows you to fly knife edge at any alpha you choose.  Lay the plane over and yaw it right back up - rudder power is not a factor!


Styles include:
       #4 fits for standard servos up to .76" wide
       #4W for JR8611 servo up to .82" wide
       #4XW for Futaba 9152 servos - 1.01" wide
note:  if in doubt about which servo you will use, you should pick the #1W.  You can then use 1/32" shims to install the smaller servo if necessary.
The kit includes:
Laser-cut mount
Laser-cut servo horn
4-40 bolts to mount servo arm to horn
Servo lock bolt and nut
Instruction sheet
The only items you will need are a servo and a Hangar9 HD 1/2 servo arm to match.

Weight:  Approx 54 grams
                       #4 -                 .885"/9.06"
                       #4W -              .945"/9.06"
                       #4XW -            1.115"/9.00"
Depth (installed depth): 
                       #4 & 4W -        2.04"
                       #4XW -            2.225"

Click Here for Pricing or to Purchase

Back to Spec Page

Back to Home Page