webddd.jpg

Direct Drive Conversion Kits

Home | News | Aircraft | Store | Gallery | Contact Us | Info

 
SO, you like the idea but are totally confused about where to start?  No problem...We have assembled kits to take the guesswork out of ordering!
 

35kitcontents.jpg
32%-37% Conversion Kit Contents

35% Kit

 
You moth-balled your quarter scale aerobat because you need the edge of a 35% machine.  You are finally at the skill level to appreciate the maximum performance capability of an unlimited control set-up...and this is it!  Let the other suckers keep chasing their planes with crooked bendy linkages.  You have the hottest control system in existence and the confidence to beat the air to submission.
 
This 35% kit comes complete with the recommended mounts for mono-wing aircraft between 32% and 37%.  You are provided mounts for 2 servos per aileron, one per elevator half, and two for the rudder.  In addition, the kit gives you the option of either fuselage or stabilizer mounted elevator servos. 
 
Included cut templates greatly speed the installation job.  Mounts are provided for 7 servos, either JR 8711's or Hitec 5955's - or a combination of both types.  Other servos .78" to .82" in width may also be used.
 
Buying as a set saves you money.  Throwing away about $90 worth of linkages pays for the kit!!  Considering the clear weight savings and performance dominance of Direct Drive...how can you pass this up?
 

35kitfig.gif
35% Kit Mount Layout

 
 
 

40kitcontents.gif
40% Conversion Kit Contents

40% Kit

So you've decided to move up with the big boys!  You have planned for months and invested huge sums to get your big plane in your hangar.  Why would you go with anything other than the slickest control system on the planet?  Here's the best part...not only is DuRant Direct Drive the most rock solid realiable system available for your wall slamming brute, but it's also the lightest and cheapest way to get your servos pounding the airstream!!
 
This 40% kit comes complete with the recommended mounts for mono-wing aircraft in the 39%-45% size.  You are provided mounts for up to 3 servos per aileron, two per elevator half, and three for the rudder. 
 
Included cut templates greatly speed the installation job.  Mounts are provided for 13 servos, either JR 8711's or Hitec 5955's - or a combination of both types.  Other servos .78" to .82" in width may also be used.
 
Buying as a set saves you money.  Throwing away about $180 worth of weak and sloppy linkages pays for the kit!!  Considering the clear weight savings and performance superiority of Direct Drive...how could you consider anything else?
 
 

40kitfig.gif
40% Conversion Kit Layout

Back to Systems Page

Back to Home Page