This is the standard conversion kit for those larger aircraft needing lots of control power. It mounts three
standard servos to drive a rudder, elevator, or aileron. It helps place the servo weight inboard. The total
weight - and price - of this mount is less than that of the linkages you will be replacing!
#3 for standard servos up to .76"
#3W for JR8611 servos up to .82"
#3XW fo Futaba 9152 servos up to 1.01"
note: if in doubt about which servo you will use, you should pick the #3W. You can then use 1/32"
shims to install the smaller servo if necessary.
The kit includes:
3 Laser-cut servo horns
4-40 bolts to mount servo arms to horns
Servo lock bolts and nuts
The only items you will need are servos and Hangar9 HD 1/2 servo arms to match.